TM 5-4310-360-14
Section VII. MAINTENANCE OF PNEUMATIC
EQUIPMENT
(3)
Remove pulley (9) and bushing (10) as
4-14. Belt Guard and Pulley.
an assembly. Remove key (11).
Removal.
a.
(4)
Remove compressor flywheel (5,
WARNING: Do not operate the air com.
pressor with the belt guard removed.
(1)
Remove machine screw (1, figure 4-2)
(5)
Remove cap screws (4, figure 4-2). nuts
and belt guard cover (2).
(5). lockwashers (6) and support (7).
(2)
Loosen engine mounting bolts (1,
(6)
Lift out belt guard (3).
belts (8, figure 4-2). Remove V-belts.
Figure 4-2. Belt guard, removal and installation.
4-12
