TM 5-4310-362-14
2-3. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (cont)
B - Before Operation
D - During Operation
A - After Operation
W - Weekly
ITEM TO BE INSPECTED
Equipment Will Be
ITEM
INTERVAL
Reported Not
NO.
PROCEDURE:
Ready (RED) If:
BDAW
7
AIR HOSE. Check hose (9) for cuts or cracks. Check
for air leaks during operation, especially around
fittings. Tighten 2 connectors on either end of
hose if loom.
8
INFLATOR GAGE. Check gage (10) for proper
operation. Check connections for leaks. Tighten
connections if loose.
9
AIR CLEANER ELEMENT. Check element (11) for
dirt. Clean if dirty. Replace element (11) if
cleaning is ineffective.
10
AIR TANK. Check tank (12) for rust or peeling paint.
Remove rust or loose paint with wire brush and
repaint affected area.
Change 1 2-5
