TM 5-4310-362-14
Section III. OPERATION UNDER USUAL CONDITIONS
2-4. OPERATING PROCEDURES
STEP
PROCEDURE
REMARKS
1.
Open drain cock (1) to drain condensation from
Accumulated moisture will rut
tank. Then close drain cock (1).
out inside of tank.
2.
Turn main power switch ON.
Air compressor will automatically
cut in when pressure drops below
160 psi, and cut out when pres-
sure reaches 180 psi.
CAUTION
Notify organizational maintenance if the
compressor has shut down due to overload.
Overload condition must be removed before
compressor is restarted.
3.
Push RESET button (2) to restart compressor shut
Overloading of the electrical motor
down due to an overload.
causes the relay in the motor
Starter to open.
2-6
