TM 5-4310-362-14
2-4. OPERATING PROCEDURES (cont)
STEP
PROCEDURE
REMARKS
4.
Open gate valve (3).
5.
Unwind hose (4).
6.
Read pressure with pressure gage (5).
Do not press on lever (6) while
reading pressure
7.
Depress lever (6) to fill tire.
8.
Turn main power switch OFF at end of work shift.
Section IV. OPERATION UNDER UNUSUAL CONDITIONS
2-5. OPERATION IN DUSTY ENVIRONMENT
Check and clean air cleaner daily to prevent it from clogging.
Clean dirt off compressor fins so cooling ability won't be lost.
2-6. OPERATION IN EXTREME HEAT
Keep motor and compressor clean. Dirt keeps heat from escaping.
Make sure compressor gets adequate ventilation and airflow isn't blocked.
Check air filter often. A dirty air cleaner will make the compressor run hot.
2-7/(2-8 blank)
