TM 5-4310-362-14
LOCATION/ITEM
ACTION
REMARKS
8-18.
DISASSEMBLY
1.
Cylinder head (1)
Remove
(See para 8-13A, 8-13B)
2.
Piston (13)
Mark top of all pistons on side
closet to flywheel to be sure you
install them in the same position.
3.
Capscrews (2)
Remove
CAUTION
Pistons and connecting rods may
be damaged by hitting crankcase
when the cylinders are removed.
Support pistons when removing
cylinders.
4.
Cylinder (3)
Remove by twisting slightly back
Support pistons from below when
and forth while pulling upward.
removing cylinders.
5.
Gasket (4)
Discard
Used gaskets do not seal.
6.
Crankcase (26)
Tip on it's side to gain access to
hand hole plate on bottom of
crankcase.
7.
Capscrews (5)
Remove.
8.
Hand hole plate (6)
Remove.
9.
Gasket (7)
Discard.
Used gaskets do not seal.
8-24 Change 1
