TM-5-4310-368-14
3-20.
a. Inspection. Inspect oil level dipstick for any damage.
b. Replacement. Refer to organizational maintenance.
3-21.
ENGINE OIL PAN ASSEMBLY
a. Inspection. Inspect engine oil pan assembly for oil leaks or missing fasteners.
b. Replacement. Refer to organizational maintenance.
c.
Repair. Refer to organizational maintenance.
3-22.
a. Inspection. Inspect engine oil filter and filter adapter for oil leaks.
b. Replacement.
(1) Stop engine. Allow to cool 2 to 5 minutes.
(2) Turn filter element counterclockwise and unscrew filter element from filter adapter. Remove filter element.
(3) Remove seal ring from filter adapter.
(4) Install new seal ring into groove in filter adapter.
(5) Apply a light film of clean engine oil to seal ring.
(6) Position new filter element over stud on filter adapter. Screw new filter element into filter adapter.
(7) Tighten filter element handtight.
3-23.
a. Inspection. With engine and compressor operating at full load, note color of air cleaner restriction indicator. If
color is green, no further service is required. If color is red, refer to organizational maintenance.
3-24.
a. Inspection. Check compressor crankcase oil level. Add oil as required.
3-15
