TM 5-4310-368-14
3-10.
ENCLOSURE DOORS, LATCHES AND TOOL BOX
a. Inspection.
(1) Inspect each door for proper operation, dents, cracks or other defects.
(2) Inspect each hinge for proper operation.
(3) Inspect all latches and catches for proper operation.
(4) Inspect tool box and document boxes for dents, cracks and paint damage.
(5) Inspect all hardware for loose or missing fasteners.
b. Repair. Refer to organizational maintenance.
c.
Replacement. Refer to organizational maintenance.
3-11.
ENCLOSURE CORNER POSTS AND PANELS
a. Inspection.
(1) Inspect each panel and corner post for dents, cracks and paint damage.
(2) Inspect installation hardware for each panel and corner post for loose or missing fasteners.
b. Repair. Refer to organizational maintenance.
c.
Replacement. Refer to organizational maintenance.
3-12.
FUEL LINES, FITTINGS AND HOSES
a. Inspection. Inspect all lines, fittings, tubes and hoses for leaks, cracks or crimps.
b. Repair. Refer to organizational maintenance.
c.
Replacement. Refer to organizational maintenance.
3-13.
AIR LINES AND FITTINGS
a. Inspection. Inspect all air lines and fittings for leaks, cracks or crimps.
b. Repair. Refer to direct support maintenance.
c.
Replacement. Refer to organizational maintenance.
3-14.
a. Inspection. Inspect alternator assembly for loose fasteners, wire and other parts.
b. Test. Refer to organizational maintenance.
c.
Adjustment. Refer to organizational maintenance.
3-10
