TM 5-4310-369-14
b. Cleaning and Inspection.
c. Installation. Install the interstage safety valve in the
compressor cylinder head by turning the valve clockwise.
4-20. Intercooler Tube
and Compressor
Discharge Hose
Drycleaning solvent, P-D-680, used to clean parts
a. Removal.
is potentially dangerous to personnel and property.
(1) Release all air from the compressor by depres-
Avoid repeated and prolonged skin contact. Do
sing handle on air hose inflator assembly until air tank gage
not use near open flame or excessive heat. Flash
reads 0 psi.
point of solvent is 100F (38C).
removing screws.
(1) Wash the interstage safety valve with cleaning
(2) Inspect for cracks in the body of the valve.
(3) Inspect the threads for wear or damage.
Do not operate the air compressor with the belt
(4) Replace a defective interstage safety valve.
guard removed.
NOTE
tension bolts to release tension on V-belts. Remove
This valve is preset at 60 psi (4.22 kg/sq cm). A de-
V-belts (2).
fective valve should be replaced rather than repaired.