TM 5-4310-373-14
4-17. MOTOR STARTER/ASSEMBLY
This task covers:
The assembly of motor starter.
INITIAL SETUP
Equipment Condition:
Tools:
Motor starter disassembled
Materials/Parts:
As required
Personnel Required:
Approximate Time Required (minutes):
1 Mechanic
20
ACTION
REMARKS
LOCATION/lTEM
WARNING
Be sure main power is discon-
nected before doing any work
on electrical systems. Voltages
present in this equipment can
cause injury or death.
NOTE
Begin assembly by installing
1. Upper housing assembly
parts in lower housing
and contactor
assembly (8).
Install in lower housing (12).
1. Rubber cushion (16)
2. Rubber pad (15)
Install on core (11).
3. Damping pins (14)
Press into position on core (11).
4. Shading rings (13)
Install on core (11).
5. Core (11)
Place in lower housing (12).
Place into position over core (11)
6. Coil (10)
7. Retaining spring (9)
Place small end into upper
housing (4).
NOTE
Be sure spring (9) is properly
seated.
Place into position over coil,
8. Upper housing assembly
(4)
push down and secure by
hooking retaining clips (7).
Figure 4-26. Motor starter, exploded view
4-22
