TM
5-4310-373-14
4-18. MOTOR STARTER COMPONENTS/lNSPECTION/CLEANING/ADJUSTMENT
This task covers:
Inspection, cleaning and adjustment of motor starter components.
INITIAL SETUP
Equipment Condition:
Tools:
Motor starter disassembled
T1 5180-177-7033
Materials/Parts:
Compressed air
Clean rag
Personnel Required:
Approximate Time Required (minutes):
10
1 Mechanic
LOCATION/lTEM
ACTION
REMARKS
Replace if cracked or burned.
1. All motor starter
Inspect for cracks or evidence
of burning.
components
WARNING
Clean motor starter compo-
nents with compressed air no
greater than 30 psi.
WARNING
Eye protective equipment
must be worn when cleaning
with compressed air.
Blow dirt out with com-
2. All motor starter compo-
pressed air, wipe with clean
nents
rag.
1. Overload relay (1)
Turn pointer (2) if necessary
with small screwdriver to 14.8
(just below the 15 mark)
Figure 4-28. Overload Adjustment
4-24
