TM 5-4310-373-14
This task covers:
The disassembly of motor starter.
INITIAL SETUP
Tools:
Equipment Condition:
Motor Starter Removed
Main Power OFF
Materials/Parts:
As required
Personnel Required:
Approximate Time Required (minutes):
1 Mechanic
20
LOCATION/lTEM
ACTION
REMARKS
WARNING
Be sure main power is discon-
nected before doing any work
on electrical systems. Voltages
present in this equipment can
cause injury or death.
1. Motor starter enclosure
Remove from compressor.
See para 4-14.
2. Screws (1)
Remove.
3. Starter assembly (2)
Remove from base plate (3).
4. Upper housing assembly
Loosen screws at T1, T2, T3
(4) and contactor (5)
and separate from overload
relay (6).
Contactor (5) is not repair-
able and must not be dis-
assembled. (See Figure 4-25.)
Figure 4-23. Motor starter and base plate
4-20
