TM 5-4310-373-14
REMARKS
ACTION
LOCATION/lTEM
4-17. MOTOR STARTER/ASSEMBLY - continued
NOTE
Armature of upper housing
should move freely in and out
when pressed with fingers. If
not, recheck step 8.
Slide the contactor (5) and
9. Upper housing assembly
overload relay (6) together and
(4)
tighten screws at T1, T2 and
T3.
10. Starter assembly (2)
Attach to base plate (3) with
See para 4-15.
screws (1).
11. Starter assembly and base
See para 4-15.
Install in enclosure.
plate
Install on compressor.
12. Enclosure
Figure 4-27. Motor starter and base plate
4-23
