TM 5-4310-373-14
ACTION
REMARKS
LOCATION/lTEM
4-39. CENTRIFUGAL UNLOADER INSTALLATION continued
Release valve body (7)
a. Screw into cover (21)
8.
while pushing against
spring (6).
b. Tighten.
Install.
Screen (8)
9.
New felt should be used.
Install.
10. Felt (9)
Install.
11. Unloader body (10)
Lay aside.
12. Cover (21)
Install over crankshaft and
13. Spindle (11)
secure with lock washer
(12) and capscrew (13).
a. With one hand press
14. Sleeve (16)
against spring (15) and
washer (14) and hold.
b. Align weights (17) to
spindle (11) and insert
pins (18) far enough to
hold assembly together.
Be sure pins are secured firmly and are flush with spindle.
WARNING
Eye protective equipment
must be worn when using the
hammer.
c. Secure pins with drift
punch and hammer.
Install in cover (21).
15. Plunger (19)
Place in position over gasket
16. Cover (21)
(20) and secure with screws
(22).
4-60
