TM 5-4310-373-14
LOCATION/lTEM
ACTION
REMARKS
4-40. CENTRIFUGAL UNLOADER/lNSPECTlON/CLEANING continued
WARNING
Drycleaning solvent, P-D-680,
used to clean parts is poten-
ally dangerous to personnel
and property. Avoid repeated
and prolonged skin contact
by wearing rubber or non-
porous gloves when handling
the solvent or material wet
with drycleaning solvent.
Wash hands immediately
after exposure with soap and
water and use a lanolin based
skin cream to prevent skin
drying. Do not use near open
flame or excessive heat. Flash
point of solvent is 100 F
38C). Do not work with
solvent in a closed room. Be
sure there is good ventilation
or the solvent vapors will
build up in the air and become
a poisonous mixture which
can cause physical injury or
even death.
8. All parts of unloader
Clean with solvent.
WARNING
Air pressure must not exceed
30 psi when being used to
clean unloader parts.
9. Cover (7)
Blow out all valve openings
with compressed air.
4-63
