TM 5-4310-373-14
This task covers:
The removal of the electric motor.
INITIAL SETUP
Tools:
Equipment Condition:
Compressor unit OFF
Main power OFF
Materials/Parts:
As required
Personnel Required:
Approximate Time Required (minutes):
1 Mechanic
40
LOCATION/lTEM
ACTION
REMARKS
WARNING
Be sure main power is discon-
nected before doing any work
on electrical systems. Voltages
present in this equipment can
cause injury or death.
Figure 4-71. Compressor unit, belt guard side
1.
Main power
Disconnect.
2.
Belt guard cover (1)
Remove.
Nuts, washers, lock
Remove 4 each.
3.
washers and bolts (2)
4.
Drive belts (3)
Remove 2 belts.
Figure 4-72. Motor mounting bolts
5. Pulley and key (4)
Remove.
6. Motor leads
Tag and disconnect from
starter terminals T1, T2, T3.
7. Motor conduit box
Remove 2 top screws and
screws (5)
loosen 2 bottom screws.
Figure 4-73. Drive pulley and V-belts
4-67
