TM 5-4310-373-14
4-43. MOTOR ELECTRIC/INSTALLATION
This task covers:
The installation of the electric motor.
INITIAL SETUP
Equipment Condition:
Tools:
Electric motor removed
Main power OFF
Materials/Parts:
As required
Personnel Required:
Approximate Time Required (minutes):
50
1 Mechanic
REMARKS
ACTION
LOCATION/lTEM
I
WARNING
Be sure main power is discon-
nected before doing any work
on electrical systems. Voltages
present in this equipment can
cause injury or death.
Position onto base (2) with
1. Motor (1)
shaft into belt guard (3).
Push through hole in conduit
2. Motor leads (4)
box and starter enclosure.
3. Motor conduit box and
Attach to motor with screws
starter enclosure (5)
(6).
Figure 4-76. Motor mounting
4. Bolts, washers (7), lock-
Install but do not tighten
4 each.
washers and nuts
Figure 4-77. Motor leads
4-69