TM 5-4310-376-14
-
Continued
4-15. PULLEY AND HUB
LOCATION/lTEM
ACTION
REMARKS
1. Pulley
a. Replace pulley on engine shaft
with key (5) attached.
b. Line up unthreaded holes in hub
(3) to threaded holes in pulley.
2. Hub
a. Press hub (3) into pulley (4) only
far enough for capscrews (1) to
thread.
b. Thread capscrews (1) into pulley.
c. Tighten capscrews evenly until hub
is seated and pulley is secure.
4-30
