TM 5-4310-376-14
4-16. FUEL TANK LINES AND FITTINGS - Continued
REMARKS
ACTION
LOCATION/ITEM
a. Turn fuel shutoff valve (1) to closed
1. Fuel line
position (clockwise).
b. Remove clamp (2) from fuel shutoff
valve adapter (3).
c. Remove clamp (4) from in-line fuel
filter (5).
d. Remove fuel line (6).
a. Using a suitable container,
2. Shutoff valve
open fuel shutoff valve
(counterclockwise) and
d r a i n fuel from tank (7).
b. Remove fuel shutoff valve
(2) with adapter (3).
Replace in-line fuel filter in
LEGEND
accordance with preventive main-
tenance schedule in table 2-1,
1. SHUTOFF VALVE
item 5.
2.
CLAMP
3.
ADAPTER
4.
CLAMP
5.
FUEL FILTER
6.
FUEL LINE
7.
TANK
Repair as necessary to remove corrosion,
1. Fuel tank
dents, or other damage. Replace tank
cap gasket if necessary.
Install adapter (3) and shutoff valve (1)
1. Shutoff valve
onto fuel tank (7) nipple.
a. Place fuel line (6) in position.
2. Fuel line
b. Install clamps (2) and (4) between in-
line fuel filter.
This is a 4-cycle engine,
c. Fill tank with clean fresh gasoline.
do not mix oil in gas.
4-32
