TM 5-4310-377-13
3-15. DRIVE PULLEY - Continued.
Figure 3-15. Drive Pulley, Removal.
(1) Use a gear puller and remove the pulley (1) from the motor (2).
2) Remove three bolts (3) and then remove bushing (4) from pulley (1).
b. Cleaning.
(1) Remove all buildup of di rt, grease, etc. by wiping with a soft cloth (Appendix E, item 3).
WARNING
Cleaning Solvent, Federal Specification P-D-680, is toxic and flammable. Use
solvent only in a well-ventilated area. Avoid prolonged breathing of fumes. Keep
solvent away from flames. Do not use in excessive amounts. Avoid skin contact.
(2) Clean using a clean, soft cloth (Appendix E, item 3) or a medium bristle brush (Appendix E, item 4) and
cleaning solvent (Appendix E, item 2).
(3) Allow to dry.
GO TO NEXT PAGE
3-35
