TM 5-4310-378-14
Dry Cleaning Solvent
(Stoddard Solvent)
P-D-680
Combustible - do not use near open flames, near welding areas,
or on hot surfaces.
Prolonged or repeated contact of skin with liquid can cause
dermatitis. Repeated inhalation of vapor can irritate nose and
throat and can cause dizziness.
If any liquid contacts skin or eyes, immediately flush affected
area thoroughly with water. Remove solvent-saturated
clothing. If vapors cause dizziness, go to fresh air.
When handling liquid or when applying it in an air-exhausted,
partially covered tank, wear approved gloves.
When handling liquid or when applying it at an unexhausted,
uncovered tank or workbench, wear approved respirator,
goggles, and gloves.
(6) Clean metal parts using a clean, soft cloth (Appendix E, item 3) or a medium bristle
brush (Appendix E, item 1) and cleaning solvent (Appendix E, item 2).
(7) Allow metal parts to dry.
b. Replacement.
(1) Removal
(a) With air cleaner
disassembled (refer to
Service) remove two nuts
holding body (3) to
carburetor.
(2) Installation
(a) Obtain replacement air
cleaner assembly,
disassemble it, and install
body (3) onto carburetor.
(b) Install retainer (1) and
element (2) into body (3).
(c) Install cover (4) on body and
secure with clip (5).
3-42
