TM 5-4310-378-14
3-47. BELT IDLER ASSEMBLY
This task covers:
b . Replacement
Inspection
a.
Tools: General Mechanics
Tool Kit
Repair Parts: As Required
"Unit not running.
Equipment
Condition:
To avoid injury be sure unit is not running before making
inspection.
Inspection
a.
Inspect all mounting hardware. Check for secure mounting and damage.
Replacement.
b.
Remove belt guard (Para 3-11).
Remove cotter pin (5), hand lever (10), two spacers (7 and 9), two bushings (6 and 8) and pulley
shaft (4). Remove nut (1), flat washer (2) and pulley (3).
Replace any damaged parts.
Reassemble belt idler assembly components in reverse order that they were removed, or refer to
Fig. 14 of TM5-4310-378-24P (RPSTL).
