TM 4310-379-14
3-33. Battery Charging Alternator (Cont).
b.
Adjust. (figure 3-41)
(1) Loosen screw (1).
(2) Adjust belt tension so that a firm push midway between fan pulley (2) and alternator pulley (3) will depress belts
approximately 0.50-0.75 in. (1.27-1.90 cm).
(3) Tighten screw (1).
Figure 3-41. Alternator, Adjust.
c.
Replace. (figure 3-42)
(1) Loosen nut (1) and remove negative cable (2).
(2) Tag and remove wiring from alternator (3).
(3) Remove screw (4), spacer (5), and lockwasher (6).
(4) Remove screw (7), nut (8), and lockwasher (9) and remove alternator (3).
(5) Install alternator (3) and secure with screw (7), nut (8), and lockwasher (9).
(6) Ensure belts (10) are properly positioned.
3-102
