TM 5-4310-379-14
(7) Install screw (4), spacer (5) and lockwasher (6) but do not fully tighten.
(8) Adjust belt tension so that a firm push midway between alternator (3) and fan pulley (11) will depress belts (10)
approximately 0.50-0.75 in. (1.27-1.90 cm).
(9) Tighten screw (4).
(10) Connect wiring as tagged to alternator (3).
(11) Install negative cable (2) and tighten nut (1).
Figure 3-42. Alternator, Replace.
3-103
