Low Oil Pressure Shutdown Switch.

Figure 3-46. Battery and Cables, Replace.

Figure 3-47. Low Oil Pressure Shutdown Switch, Replace.

TM-5-4310-379-14 Compressor Air Reciprocating Electric Motor Driven Reciprocating Electric Motor Driven 15 CFM at 175 PSI Manual
Page Navigation
137

TM 5-4310-379-14 3-36. Low Oil Pressure Shutdown Switch. This task covers: Replace INITIAL SETUP: Tools MaterialsIParts General Mechanic's Tool Kit (NSN 5180-00-177-7033) Switch, Low Oil Pressure Shutdown Tape, Teflon (Item 25, Appendix D) Replace. (figure 3-47) (1) Tag and remove wiring from low pressure shutdown switch (1). (2) Remove switch (1). NOTE Leave 1 1/2 threads exposed when applying teflon tape. Wrap teflon tape in the direction that will not unwrap as fitting is tightened. Failure to wrap teflon tape properly or having it extend past the end of the fitting may cause a blockage in the oil system. (3) Apply teflon tape to threads of switch (1). (4) Install switch (1). (5) Connect wiring as tagged to switch (1). 3-112

Privacy Statement
Press Release
Contact