TM 5-4310-379-14
3-37. Oil Filter Assembly.
This task covers:
a.
Service
b.
Replace
c.
Repair
INITIAL SETUP:
Tools
Materials/Parts
General Mechanic's Tool Kit (NSN 5180-00-177-7033)
Oil Filter Assembly
Wrench, Torque (NSN 5120-00-554-7292)
Gasket, Oil Filter Assembly
Solvent, Dry Cleaning (Item 23, Appendix D)
Rags, Wiping (Item 21, Appendix D)
a.
Service. (figure 3-48)
(1) Remove screw (1), washer (2), shell (3), filter (4), spring (5) and gasket (6).
WARNING
Dry cleaning solvent PD-680 used to clean parts is potentially dangerous to personnel
and property. Avoid repeated and prolonged skin contact. Do not use near open flame
or excessive heat. Flash point of solvent is 100-138°F (38-60C).
(2) Clean all items, except gasket and filter, with dry cleaning solvent and dry thoroughly.
(3) Install screw (1) and washer (2) in shell (3).
(4) Install spring (5) and new filter (4).
(5) Install shell (3) and gasket (6) and tighten screw (1). Torque screw to 50-60 Ib-ft (68-81 Nm).
3-114
