TM 5-431037914
4-22. Power Take-off Assembly (Cont).
c.
Installation. (figure 4-28)
(1)
Install yoke (21), shaft (19), and two keys (20).
(2)
Aline yoke (21) on shaft (19) and tighten two screws (18).
(3)
Install handle (17) and tighten screw (16).
(4)
Install clutch assembly (9) and secure with lockwasher (14) and nut (15).
(5)
Install grease line (13) and tighten two fitting nuts (12).
(6)
Install PTO (6) and clutch assembly (9) and secure with 12 screws (7) and lockwashers (8).
(7)
Install pulley(5).
(8)
Install collet (1), as noted during removal, and position pulley (5) on collet (1) and secure with three screws (2)
and washers (3).
FOLLOW-ON MAINTENANCE
Install drive belts (para. 3-12).
4-68 Change 1
