TM 5-4310-379-14
4-23. Clutch Assembly.
This task covers:
Replace
INITIAL SETUP
Tools
Equipment Condition
General Mechanic's Tool Kit (NSN 5180-00-177-7033)
Drive belt removed (para. 3-12).
Puller Kit, Mechanical (NSN 5120-00-033-5606)
Materials/Parts
Clutch Assembly
Solvent, Dry Cleaning (Item 23, Appendix D)
Rags, Wiping (Item 21, Appendix D)
a.
Remove. (figure 4-29)
(1)
Connect suitable lifting device to PTO housing (1).
(2)
Remove 12 screws (2) and lockwashers (3) and remove PTO housing (1) and three clutch discs (4).
(3)
Using puller, remove pilot bearing (5).
(4)
Loosen two fitting nuts (6) and remove grease line (7).
(5)
Bend out lockwasher (8) and remove nut (9), lockwasher (8), and clutch assembly (10).
(6)
Loosen screw (11) and remove handle (12).
(7)
Remove two screws (13) and lockwashers (14).
(8)
Slide shaft (15) either right or left and remove two keys (16) and remove shaft (15) and yoke (17).
(9)
Remove eight screws (18) and lockwashers (19) and remove drive ring (20).
4-70