TM 5-4310-379-14
(p)
Remove nut (46), lead (4), lockwasher (47), nut (48), washer (49), spacer (50), and remove plastic bushing (51)
and lead (52) with brushes (41).
(q)
Inspect brushes (41) and replace if worn, cracked or otherwise damaged.
(r)
Remove nut (53), washer (54), and insulator (55) and push stud (56) into body (20) and remove insulator (57)
and bushing (58).
(s)
Inspect brushes (44) and replace if worn, cracked or otherwise damaged.
(t)
Remove eight screws (59) and four pole shoes (60), and remove field coil (61) and insulating pad (62).
(u)
Remove brass plug (63) and lubricating wick (64) from housing drive (18).
(v)
Using punch, remove bushing (65).
(w)
Using punch, remove bushing (66).
(x)
Remove bushing (67) from cover (38).
(y)
Inspect body (20), housing drive (18), lever housing (19), and cover (38) and replace all items that are cracked or
otherwise damaged.
(z)
Inspect armature (34) and replace if wires are burnt or armature (34) is otherwise damaged.
(aa)
Inspect drive (31) and replace if teeth are worn, chipped, missing or drive (31) is otherwise damaged.
(ab)
Inspect bushings (65), (66), and (67) and replace if cracked, worn, or otherwise damaged.
(ac)
Inspect lever (30) and replace if cracked, bent, or otherwise damaged.
(ad)
Inspect solenoid (7) and replace if damaged.
(ae)
Inspect plunger (11), washer (12), boot (13), retainer (14), spring (15), retainers (16), and snap ring (17) and
replace any item that is bent, cracked, worn, or otherwise damaged.
(af)
Inspect pin (28) and replace if bent, worn, or otherwise damaged.
5-45
