TM 5-4310-380-13
3-15. DRIVE PULLEY - Continued.
Figure 3-15. Drive Pulley, Removal.
(1) Loosen two setscrews (1) and use a gear puller and remove pulley (2) from the motor (3).
(2) Remove key (4).
b. Cleaning.
(1) Remove all buildup of dirt, grease, etc. by wiping with a soft cloth (Appendix E, item 3).
WARNING
Cleaning Solvent, Federal Specification P-D-680, is toxic and flammable. Use solvent only in a
well-ventilated area. Avoid prolonged breathing of fumes. Keep solvent away from flames.
Do not use in excessive amounts. Avoid skin contact.
(2) Clean using a clean, soft cloth (Appendix E, item 3) or a medium bristle brush (Appendix E, item 4) and
cleaning solvent (Appendix E, item 2).
(3) Allow to dry.
GO TO NEXT PAGE
3-29
