TM 5-4310-380-13
3-16. AIR COMPRESSOR- Continued.
Figure 3-17. Air Compressor, Removal.
(1) Disconnect discharge tube (1) at check valve.
(2) Remove four bolts (2) and four lockwashers (3).
(3) Remove the air compressor (4).
b. Cleaning.
(1) Remove all buildup of dirt, grease, etc. by wiping with a soft cloth (Appendix E, item 3).
WARNING
Cleaning Solvent, Federal Specification P-D-680, is toxic and flammable. Use solvent only in a
well-ventilated area. Avoid prolonged breathing of fumes. Keep solvent away from flames.
Do not use in excessive amounts. Avoid skin contact.
(2) Clean using a clean, soft cloth (Appendix E, item 3) or a medium bristle brush (Appendix E, item 4) and
cleaning solvent (Appendix E, item 2).
(3) Allow to dry.
GO TO 1NEXT PAGE
3-33
