TM 5-4310-380-13
3-18. OIL FILLER CAP, BREATHER CAP, PLUG, AND SIGHT GAGE.
This task covers:
a. Removal
b.
Cleaning
c.
Inspection
d. Repair
e.
Installation
SET-UP:
Tools:
Pipe wrench
1/2 inch wrench
Pliers, common
Phillips screwdriver
Materials:
Sight Gage Seal (1 each)
Lubricating Oil (Appendix E, item 1)
Brush, Medium Bristle (Appendix E, item 4)
Cloth, Lint-Free (Appendix E, item 3)
Solvent, Dry Cleaning (Appendix E, item 2)
Grease (Appendix E, item 6)
WARNING
Cleaning Solvent, Federal Specification P-D-680, is toxic and flammable. Use solvent only in a
well ventilated area. Avoid prolonged breathing of fumes. Keep solvent away from flames.
Do not use in excessive amounts. Avoid skin contact.
Personnel:
1 Person
Equipment Conditions:
Electrical power removed at master control panel.
Tank drain cock open and air bled off (para. 2-4).
Crankcase drained (para. 3-2).
GO TO NEXT PAGE
3-38
