TM 5-4310-387-14
Table 2-1. Operator Preventive Maintenance Checks and Services (PMCS) (Cont).
B - Before
D - During
A - After
W - Weekly
Interval
Item
Item to be Inspected.
Equipment is not
No.
B
D
A
W
Procedure
Ready/Available If
f.
Check all lines and fittings for tightness, cracks,
Lines are deteriorated,
deterioration, and wear at points subject to
cracked or otherwise
vibration.
damaged.
g.
Check drive belts for wear and adjustment. Notify
unit maintenance if wear or out of adjustment is
present.
h.
Check inlet air filter. Notify unit maintenance to
service inlet air filter after 20 hours of operation.
i.
Inspect inlet air filter hose for cracks.
Air inlet hose is cracked or
otherwise damaged.
j.
Inspect intercooler coils for damage, loose
Intercooler coils are loose or
connectors and excessive dirt. Clean coils
damaged.
of dirt as needed.
k.
Inspect filler hose for current pressure test.
Filler hose pressure test out
of date.
I.
Check compressor for date of last test in
Compressor test date is out
accordance with TB 43-0151.
of date.
3.
Engine Assembly.
a.
Check engine assembly for damaged or missing
components.
b.
Check engine oil level and add oil as needed.
Oil level is below add oil
mark.
c.
Check air cleaner oil level and add oil as needed.
d.
Check fuel lines for leaks or damage.
Class I or greater fuel leak
is present.
e.
Check fuel tank and replenish with clean diesel
fuel if low.
2-9
