TM 5-4310-387-14
Figure 2-5. Hand Position.
WARNING
Always keep hands, feet and clothing clear of moving parts of other rotating
machinery.
(8) If engine fails to start, repeat steps (4), (5), (6) and (7) above.
(9) For cold weather starting, prior to step (4) above, rotate the automatic compression release (8) clockwise
one position to the NEUTRAL position. Engage the hand crank (7) and turn the engine a minimum of thirty
(30) turns of the crank. Then continue the normal starting sequence of steps (4), (5), (6) and (7) noting the
following: The compressor release mechanisms should only be moved one position clockwise at this point.
NOTE
If compressor unit is equipped with cold start primer system, activate primer
system by pushing knob (10) prior to step (7) above.
For operation below 32°F (0°C), diesel fuel marked #1 or #1 D will provide easier
starting. Do not use #1 or #1 D diesel fuel at temperature higher than 32°F (0°C).
(10) After the engine starts, remove and store the hand crank (7).
2-13
