TM-5-4310-389-14
15.
Mount engine in place to inner frame.
16.
Align the pulleys between the compressor and engine. Check for parallel or angular alignment.
17.
Fasten the PTO clutch housing to engine (paragraph 4-23).
18.
Replace V-belts.
19.
Reinstall muffler and spark arrestor onto exhaust manifold (paragraph 3-36).
20.
Reinstall oil bath air cleaner to intake manifold (paragraph 3-31).
21.
Reattach cold start aid to the intake manifold.
22.
Reinstall speed control/throttle cable.
23.
Replace fuel line connection to fuel feed pump (paragraph 3-27).
24.
Replace electrical connections.
25.
Refill oil to proper level (paragraph 3-21).
26.
Remove any slack in bolts remaining between engine and vibration mounts.
c.
Speed Control/Throttle (figure 4-13).
Figure 4-13. Stop Lever/Solenoid Speed Control/Throttle
4-44
