TM-5-4310-389-14
3.
Using two open end wrenches, loosen and remove the hex nuts and washers.
4.
Remove bolts, washers, and vibration mounts.
5.
Renew, as required.
6.
Replace vibration mounts and washers. Secure with bolts. Tighten hex nuts.
b.
Engine.
1.
Remove electrical connections to starter motor and alternator.
2.
Engage clutch from engine using toggle lever. Remove PTO clutch from engine (paragraph 4-23).
3.
Remove V-belts.
4.
Remove speed control/throttle cable.
5.
Remove fuel supply and return line connection to fuel feed pump (paragraph 3-27).
6.
Drain oil (paragraph 3-21).
7.
Remove cold start aid connection from #1 cylinder (paragraph 3-37).
8.
Remove oil bath air cleaner from the intake manifold (paragraph 3-31).
9.
Remove muffler and spark arrestor from exhaust manifold (paragraph 3-36).
10.
Remove oil pressure line from engine.
WARNING
To prevent injury to personnel, attach a suitable lifting device to the engine, as it weighs 650 lbs.
11.
Attach lifting device to engine.
12.
Loosen and remove bolts that secure engine to frame.
13.
Attach suitable lifting device to engine, as it weighs 650 lbs.
14.
Remove and replace engine.
4-43
