TM-5-4310-389-14
Figure 4-34. Mounting Rocker Arm
Figure 4-35. Upper Cover Plate
Shaft Support
aa.
Install the fuel delivery line, using clips to cylinder 1, to the crankcase and the line leading to cylinder 2 to the
front vertical plate. Install a rubber sleeve between the clip and fuel delivery line. Tighten injection piping. Refer to
table F-1.
ab.
Hook the air cowling to the upper cover plate and close.
NOTE
Do not exchange gaskets for intake and exhaust manifolds.
ac.
Install new gaskets, flat end upwards, for the intake and exhaust manifolds.
ad.
Mount the intake manifold using washers and nuts.
ae.
Place the exhaust manifold in position. Install the washers and tall brass nuts.
af.
Install the air filter.
4-61