TM-5-4310-389-14
t.
Attach rear housing (17) to rectifier diode terminals (19).
u.
Place stator leads on studs and attach rear housing (17) to stator assembly (15). Replace washers and nuts onto A
terminals.
v.
Reattach rear housing assembly (with stator, 15) to front housing assembly (8) (with rotor, 12) with four thru-bolts
(18).
w.
Reinstall four spacer (7), fan (6), and fan baffle (5), and secure with Woodruff key (11).
x.
Replace pulley (3) and spacer (4) onto shaft and secure with split lock washer (2) and pulley mounting nut (1).
y.
Mount the alternator in a fixture cable of producing 5000 alternator rpm.
1.
Connect leads, meters and instruments as shown (figure 4-68).
NOTE
The carbon pile or resistor load bank and ammeter must be capable of handling the alternator rated
output at rated rpm.
Figure 4-68. Alternator Performance Test
4-96
