TM-5-4310-389-14
4-23. CLUTCH.
DESCRIPTION
This task covers: Replace. Repair.
INITIAL SETUP
Tools:
Equipment conditions:
General Mechanic Tool Kit
Equipment secured
Dial indicator
(paragraph 2-11).
Hammer
Materials/parts:
Rigging device
Wood blocks
REMOVAL
a.
Removal of PTO from the engine.
NOTE
Unless otherwise noted, callouts refer to figure 4-69.
1.
Remove all attached parts such as guards, PTO front cover, belts, and drive components. Remove the drive key
and grease fitting from the output end of the shaft.
NOTE
Not all power take-offs will have a grease fitting in the output end of the shaft. (Engage clutch
operating handle to hold clutch facings in place, when removing PTO from engine.)
WARNING
To prevent injury, ensure that rigging device of adequate capacity is installed to lift the power take-
off.
4-98
