TM-5-4310-389-14
SERVICE
NOTE
Check oil level every day prior to putting compressor into operation.
1.
Pull oil dipstick out, located at the rear of the compressor (2, figure 3-5).
Figure 3-5. Compressor Block
2.
Wipe off dipstick with a lint-free cloth; reinsert dipstick.
3.
Oil level should rest between the indentation marks on the dipstick when removed.
4.
If oil is required, unscrew the oil filler cap (1) located above the oil pump belt cover.
5.
Add oil, as necessary, through the oil filler.
c.
Change Lube Oil.
3-21
