TM-5-4310-389-14
Figure 3-8. Belt Guard
Figure 3-9. Compressor V-Belt and Idler Pulley
5.
Tighten both hex bolts.
6.
Replace belt guard and tighten 6 hex bolts.
SERVICE
1.
Loosen (9/16-inch) hex bolts (2) on idler pulley control arm.
2.
Push pulley up providing enough slack to remove belts.
NOTE
When two V-belts are provided, always renew both belts even though only one may be damaged.
3.
Replace belts as a matched set.
4.
Push pulley down removing all slack.
5.
Retighten hex bolts (2).
6.
Replace belt guard and tighten six hex bolts.
f.
Oil Pressure Regulating Valve (Compressor).
3-24
