TM 5-4310-393-14
NOTE
The cylinder is designed with an internal bevel at the bottom to assist in insertion
of the piston rings. If installing the piston without use of the piston ring clamp,
ensure that the 120 degree spacing of ring gaps is maintained.
FIGURE 5-38. MOUNTING CYLINDER
5-6.6. ENGINE PISTON.
This task covers- A. Inspect B. Repair C. Replace
Tools:
Materials/Parts:
Shop Set, Automotive Field
Solvent, Dry Cleaning NSN 6850-00-281-1985
Maintenance, Basic
Lubricating Oil
Equipment Conditions:
Cylinder Removed From Engine
A.
Inspect
1.
Removing the Piston for Inspection.
5-31
