TM 5-4310-393-14
3-15.2. ENGINE OIL BATH AIR CLEANER FILTER.
This task covers: A Service B. Replace.
Tools
Materials/Parts:
Tool kit, General Mechanic's Set
Engine Lubricating Oil
Lint-free Cloth NSN 7920-00-044-9281
Air Cleaner (P/N 4009400)
Shim Set (P/N 01'-*4600)
Equipment Conditions,
Engine secured.
A.
Service.
1.
Servicing the Oil Bath Air Cleaner.
a
Pull rain hood (4) off and check for dirt,
debris and blockage. Replace rain hood if damaged.
b
Unlatch two spring clips (Figure 3-14, Item
7).
c.
Remove bottom cup and gasket assembly
(3) carefully so as not to spill oil.
d
Empty oil from cup into a suitable container
for disposal. Rinse cup with clean engine oil and wipe
clean and dry with a lint free cloth
e.
Fill cup with clean engine lubricating oil to
the three indicator holes in the side of inner cup in the
bottom of the air cleaner.
f.
Replace cup and secure spring clips (7).
FIGURE 3-14. ENGINE OIL BATH AIR CLEANER FILTER
g.
Wipe housing and rain cover clean with lint free cloth.
B.
Replace.
1.
Removing the Oil Bath Cleaner.
a
Remove two 8 mm hex nuts (Figure 3-14, Item 1) and washers (2) from studs (5).
b
Hold air cleaner in a vertical position and remove it from the crankcase.
c.
Remove and discard the defective parts.
2.
Installing the Oil Bath Cleaner.
a.
Install the oil bath air cleaner and shims (6) with new parts in reverse order of removal.
3-23
