TM 5-4310-393-14
a.
Turn
the
element
90°
on
reinstallation and mark the end of the filter
element in reference to the inlet opening of
housing. Replace a dirty element once it has
been turned three times.
b.
Replace
O-rings
(3
&
4),
if
damaged. Lubricate O-rings with halo carbon
grease when installing.
c.
When
reinstalling/replacing
the
element (2), ensure spring (5) on top cover (1) is
placed properly.
3.
Removing/Replacing the Intake Air Filter.
a.
Loosen the clamp securing the air
cleaner to the valve head.
b.
Remove the air cleaner, replace if
necessary.
c.
Lubricate the O-ring on the valve
head and reinstall the air cleaner.
FIGURE 3-11. COMPRESSOR INTAKE AIR CLEANER FILTER
3-14.4 INTERMEDIATE FILTER.
This task covers: A. Service
Tools:
Materials/Parts:
Tool kit, General Mechanic's Set
Lint-free Cloth NSN 7920-00-044-9281
Grease, Halo Carbon NSN9150-00-754-2760
Detergent, Non-ionic NSN7930-00-282-9699
O-ring (P/N N03556)
Equipment Conditions:
Engine Shut Down and Cool.
System Purged of Pressure
A.
Service.
1.
Removing the Sintered Filter. Refer to figure 3-12.
3-20
