TM 5 4310-451-14
4-40. ENGINE CONTROL ASSEMBLY MAINTENANCE (Con’t).
e.
INSTALLATION I
1.
Install bracket (15) with two new lockwashers (17) and screws (16).
2.
Install engine control assembly (8) on bracket (15) with three screws (6), new lockwashers (14), and nuts (13).
3.
Install engine control rod (9) on governor lever (10) and connecting link (3) with two new lockwashers (11) and
nuts (12).
4.
Install compressor control rod (2) on connecting link (3) and inlet valve (1) with two new lockwashers (4) and nuts
(5).
5.
Install two lines (7) on engine control assembly (8).
TA704747
4-70
