TM 5 4310-451-14
4-41. ENGINE CONTROL ASSEMBLY ADJUSTMENT.
This Task Covers: Adjustment
Initial Setup:
Tools/Test Equipment:
•
General mechanic's tool kit
a.
ADJUSTMENTI
1. Loosen nuts (1 and 3) on engine control rod (2).
2. Loosen nuts (4 and 6) on compressor control rod (5).
3. Turn engine control rod (2) clockwise or counterclockwise until measurement between nuts (1 and 3) is 18.25
in.(46. cm). Do not tighten nuts.
4. Turn compressor control rod (5) clockwise or counterclockwise until measurement between nuts (4 and 6) is 25.0
in. (63.5 cm). Do not tighten nuts.
4-72
