TM 5 4310-451-14
4-40. ENGINE CONTROL ASSEMBLY MAINTENANCE (Con’t).
2.
Place assembled parts in cover (34).
3.
Install body (29) over assembled parts on cover (34) using three screws (38), new lockwashers (39), and nuts
(40).
4.
Install nut (28) and screw (27).
5.
Install two adapters (35) in cover (34).
6.
Install adapter (37) and silencer (36).
7.
Install connecting link (3) on engine control assembly (8) with screw (24) and nut (18).
8.
Install pin (23) and new cotter pin (19).
9.
Install adjusting screw (21) in engine control assembly (8).
10.
Install spring (20) on adjusting screw (21) and connecting link (3).
11.
Install one nut (22) on adjusting screw (21). Tighten until tension is on spring (20).
12.
Install second nut (22) on adjusting screw (21) until tight against first nut (22).
4-69
