TM 5-4310-451-14
4-66. BRAKESHOE REPLACEMENT (Con’t).
4.
Remove lever (14) from mounting plate (5).
5.
Remove two springs (13) from brakeshoes (12 and 15) and anchor pin (16).
6.
Remove spring (11) from brakeshoes (12 and 15).
7.
Remove brakeshoes (12 and 15) from mounting plate (5).
b. CLEANING AND INSPECTION
WARNING
DO NOT handle brakeshoes, brakedrums, or other brake components unless area has been
properly cleaned. There may be asbestos dust on these components which can be dangerous if
you touch It or breathe It. Wear an approved filter mask and gloves. Never use compressed air or
a dry brush to clean brake components. Dust may be removed using an Industrial-type vacuum
cleaner. Clean dust or mud away from brake components with water and a wet, soft brush or
cloth. Failure to follow this warning may result In serious Illness or death to personnel.
1.
Clean all brake parts and dry thoroughly.
2.
Inspect all components for damage and wear. Replace parts as necessary.
TA704810
4-150
