TM 5-4310-451-14
4-66. BRAKESHOE REPLACEMENT (Cont).
3.
Inspect brakeshoe linings (17) for cracks.
Brakeshoe linings should have a minimum
thickness of X In. (3.2 mm). Replace
brakeshoes if cracked or if lining thickness Is
less than X in. (3.2 mm)
4.
Measure rivets (18) for Y%8 in. (1.6
mm)
depth
below
brakeshoe
lining
(17).
Replace brakeshoes if depth of rivets Is not at
least Y6 In. (1.6 mm) below brakeshoe lining.
c.
INSTALLATION
1.
Position brakeshoes (12 and 15) on mounting plate (5).TA704811
2.
Install spring (11) on brakeshoes (12 and 15).
3.
Install two springs (13) on brakeshoes (12 and 15) and anchor pin (16).
4.
Position lever (14) on mounting plate (5).
4-151