TM 5-4310-451-14
4-65. HANDBRAKE CABLE REPLACEMENT (Con’t).
3.
Remove two locknuts (10), washers (11), bracket (12), handbrake cable (1), two screws (8), and spacer (7) from
spring plate (9). Discard locknuts.
4.
Remove cotter pin (18), clevis pin (16), and clevis (15) from handbrake lever (17). Discard cotter pin.
b. INSTALLATION
NOTE
Both handbrake cables are Installed same way. This procedure covers left handbrake cable.
1.
Install clevis (15) on clevis (17) with clevis pin (16) and new cotter pin (18).
TA704806
4-146
