TM 5-4310-451-14
4-75. SPRING REPLACEMENT (Cont).
4.
Position spring (4) on axle (5). Ensure that spring seats properly on axle.
5.
Install bracket (6) on spring (4) and axle (5) with two U-bolts (3) and four nuts (7).
6.
Install spring (4) on bracket (2) with four screws (1) and new locknuts (8).
7.
Using floor jack, raise axle (5) so that tires are off ground.
8.
Remove jack stand from under air compressor unit.
9.
Lower floor jack and remove from under air compressor unit.
FOLLOW-ON TASKS:
Connect handbrake cable to spring plate (rear spring only) (see paragraph 4-65).
TA704838
4-183/(4-184 Blank)